Terrano XT - Personalizing Your Device

5. PERSONALIZING YOUR DEVICE
Get the most out of your TERRANO XT by changing the settings and customizing your unit according to your
own personal preferences, using either of the following methods:
● Terrano Connect on Windows / Mac - minimum requirements - Windows® 7 / Mac OS X 10.8
● Unit buttons.
● Configuration voice menu on your device.
Terrano recommends customizations and settings before getting out on the road.
Object
Default
Value
Description
Configuration
Voice Menu
Audio priority
(A2DP/Bluetooth
intercom)
Bluetooth
intercom
Priority of audio source playing through speakers. Either music is
not interrupted by an intercom call, or vice-versa.
ü
Background Audio
Level
N/A Sets the background audio volume when parallel audio streaming
is on (see Parallel audio streaming (Enable/Disable) below).
û
Bluetooth friendly
name
TERRANO
XT
Sets the name that appears on your phone while pairing.
û
FMBand According to
Your Region
If you are in Japan, select Japan. Otherwise, select Worldwide.
û
Gain Control Medium Adjusts speaker volume according to ambient noise and riding
speed. For example, when set to Low, higher ambient noise will
cause the volume increase to kick in at a higher level.
ü
Language According to
Your Region
Voice announcements and voice-assisted menus language (see
"Spoken Status Announcements" below).
ü
Mobile priority Mobile 1 If you paired your unit to two mobile phones, you must set one of
them as the default phone for outgoing calls.
û
Parallel audio
streaming
(Enable/Disable)
Enable You can hear two audio sources simultaneously. For example,
hear GPS while listening to music.
Limitations may apply when using certain iOS devices.
ü
RDS
(Enable/Disable)
Disable Radio Data System allows the radio to automatically retune to the
strongest frequency available for the FM station you are listening to
when the signal becomes too weak.
ü
Set speed dial
numbers
Empty Pre-set phone numbers for automatic dialing.
û
Set the six FM
radio presets
107.5 Pre-set FM radio stations.
û
Spoken Status
Announcements
(Enable/Disable)
Enable Voice announcements inform you to whom or to what device you
are connected.
ü
VOX activation
(Enable/Disable)
Enable Enables voice activation of certain features for hands-free
operation.
ü
VOX sensitivity
(Low/Medium/High)
Medium Adjusts your microphone sensitivity for voice activation while
riding. For example, in high ambient noise situations, setting VOX
sensitivity to low requires speaking loudly.
You can set the microphone sensitivity (high, medium, or low)
to better fit your voice profle in the Audio settings in the Terrano
Connect app.
ü
17