Terrano XT - Setting the Default Mobile Phone; Using Parallel Audio Streaming

5.1 SETTING THE DEFAULT MOBILE PHONE
If you paired your unit to two mobile phones, you must set one of them as the default phone for outgoing calls.
To set the default phone:
● During a mobile call, press for 5 seconds.
5.2 USING PARALLEL AUDIO STREAMING
With parallel audio streaming, you can hear audio instructions during a mobile or Bluetooth intercom call, or while
listening to other audio sources, such as music or FM radio.
Limitations may apply when using certain iOS devices.
Your TERRANO XT sets the various audio sources to either foreground (volume remains the same) or
background (volume reduced) as described in the following table:
Mobile Phone 1/2
Audio
Instructions
Intercom 1 Intercom 2 Music FM Radio
Foreground Foreground
Foreground
1
Foreground
1
Foreground Foreground
Foreground Background
Foreground Background
Foreground Background
Foreground Background
Foreground
2,3
Foreground
2,3
Background
Foreground
4
Foreground
5
1
If you add an intercom call to a mobile phone call creating a conference call, the volume for both audio sources is
the same.
2
If you make two intercom calls simultaneously creating an intercom conference call, the volume for both audio
sources is the same.
3
If you make two intercom calls simultaneously creating an intercom conference call, you cannot hear the mobile
phone or audio instructions.
4
If you play music only, the music volume is not reduced.
5
If you play the FMradio only, the FM radio volume is not reduced.
In some cases, parallel audio streaming may not work properly due connected device limitations (music player
or GPS navigator).
Terrano recommends that during a 3-way or 4-way Bluetooth intercom conference call, the rider who is
connected to only one intercom call listens for mobile phone and GPS announcements.
You cannot use music sharing for voice audio with riders during parallel audio streaming.
18