Need help?Do you have a question about the TerraTec DMX 6Fire USB and is the answer not in the manual?
General| Sample Rate | Up to 96 kHz |
|---|---|
| Bit Depth | 24-bit |
| Power Supply | USB Bus Powered |
| Microphone Preamps | 2 |
| Phantom Power | Yes |
| Headphone Output | 1 |
| MIDI I/O | Yes |
| Driver Support | Windows, Mac OS |
| Type | Audio Interface |
| Channels | 6 |
| Connectivity | USB |
| Inputs | 2 x XLR/TRS combo |
| Outputs | 1 x Headphone |
| USB | USB 1.1 |
Detailed steps for installing the DMX 6Fire USB driver on Windows XP systems.
Details on support for Microsoft's DirectSound and WDM specifications.
Explanation of WDM sample rate interpolation and its quality implications.
Using the mixer interface to control volumes, routing, and input selection.
Adjusting signal levels for mono channels using faders and mute buttons.
Adjusting the volume levels for analogue and digital outputs via the Control Panel.
Manual selection of sample rates to avoid quality loss due to conversion.
Adjusting ASIO latency settings and understanding ASIO functionality.
To Next Page
