EasyManua.ls Logo

TerraTec PHASE 26 USB - Technical Specifications and System Requirements; Hardware Technical Data; Software and Driver Support

TerraTec PHASE 26 USB
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix A - Technical Data
External USB device (USB 1.1)
3 analog stereo outputs (rear side), Line level max. 2.1V RMS, Cinch (RCA)
1 analog stereo input (rear side), Line level to 2.1V RMS, Cinch (RCA)
1 analog stereo input (front side), Line level to 2.1V RMS, Cinch (RCA)
1 analog stereo output (front side), Line level max. 2.1V RMS, Cinch (RCA)
1 analog stereo Phono input (front side), for moving-magnet systems up to
12 mVolt, cinch (RCA).
1 analog mono microphone input (front side), 6.3 mm jack (TRS)
1 analog stereo headphone output (front side), 6.3 mm jack (TRS)
1 digital stereo input and output (front side), Toslink / optical.
1 digital stereo input and output (front side), Coax / electrical.
1 MIDI input and output (rear side), 5-pin DIN
Microphone input control range: 9mV - 500mV.
Headphone output power: 36 mW.
Output impedance of the line outputs: 220 Ohm.
Input impedance of the line inputs: 10 kOhm.
Signal-to-noise ratio A/D, weighted: 97 dB (A).
Signal-to-noise ratio D/A, weighted: 102 dB (A).
24 bit/96 kHz A/D converter with 98 dB dynamic range (S/NR)*
24 bit/96 kHz D/A converter with 106 dB dynamic range (S/NR)*
24 bit/96 kHz stereo digital input (S/PDIF with up to 24 bit/96 kHz)
24 bit/96 kHz stereo digital output (S/PDIF with up to 24 bit/96 kHz)
Software
MME and DirectSound support for Windows 2000 and Windows XP (generic USB
audio driver).
Core Audio/MIDI support for MAC OS10 (generic USB audio driver).
ASIO 2.0 support for Windows and MAC OS9.
WDM kernel streaming (e.g. for Sonar ™)
DirectSound 3D
Special ControlPanel for Windows 98SE/ME/2000 and Windows XP
Bundled software
Algorithmix Sound Laundry TerraTec Edition
PHASE 26 USB (English) 45

Related product manuals