Tesla CYBERTRUCK - Cargo Bed

Overview
WARNING: Passengers must always be seated in
seats with seat belts fastened at all times when the
vehicle is in motion. Never allow passengers or
pets to ride in the cargo bed, even with the
tonneau cover closed. Doing so can result in
serious injury or death.
1.
Tonneau cover (Accessing the Cargo Bed on page
60)
2.
LED light bars (Lights on page 83)
3.
Tailgate and tonneau cover switches (Accessing the
Cargo Bed on page 60)
4.
Charge port manual release (Manually Releasing
Charge Cable on page 172)
5.
Power outlets (Cargo Bed Outlets on page 22)
6.
Tailgate emergency release (Tailgate Emergency
Release on page 61)
7.
L-tracks (Securing Cargo on page 62)
8.
Front tie-downs (Securing Cargo on page 62)
9.
Attachment points (Securing Cargo on page 62)
10.
Rear tie-downs (Securing Cargo on page 62)
11.
Sealed storage (Under Bed Compartment on page
62)
For dimensions, weight capacities, and storage volumes
of the
cargo bed and its associated components, see
Dimensions, Weights, and Cargo Capacity on page 210.
CAUTION:
Although the tonneau cover protects
contents from the majority of water during rain,
snow, etc., it does not make the cargo bed
waterproof. Water ingress and/or condensation
can occur. Therefore, do not store items that can
be damaged by water under the tonneau cover.
Store water-sensitive items in the cab, the Under
Bed Compartment on page 62, or the Powered
Frunk on page 58.
WARNING:
Never fill, store, or transport volatile
solvents, chemicals, or liquids anywhere in the
cargo bed or the under bed compartment. Doing
so can cause spills, or allow fumes to accumulate,
resulting in damage, serious injury, or death.
Accessing the
Cargo Bed
When Cybertruck is parked, use these exterior switches
to access the
cargo bed:
1.
Tonneau Open - Fully press and release to fully open
the tonneau cover. Press a second time to pause the
cover. To open the tonneau cover partially, press
lightly and release the button when desired.
2.
Tonneau Close - Fully press and release to fully close
the tonneau cover. Press a second time to pause the
cover. To close the tonneau cover partially, press
lightly and release when desired.
3.
Tailgate Open - Press to release the tailgate latch. The
tailgate drops but integrated struts prevent it from
falling forcefully.
NOTE: If the tonneau cover does not open or close when
you fully press and release the tonneau open or tonneau
close button, respectively, you may need to calibrate the
tonneau cover. For more information, see
Troubleshooting the Tonneau Cover on page 61. You
can still press lightly to partially open or close the
tonneau cover.
You can also use the mobile app and the touchscreen to
open and close the tonneau cover. On the touchscreen,
touch Controls > Tonneau.
CAUTION:
Do not drop anything onto the tonneau
cover or place objects on top that could fall o.
Avoid allowing objects or debris to enter the
tracks or interfere with the motors.
Cargo Bed
60 Owner's Manual