Tesla MODEL 3 2012 - Wheels and Tires

Wheel Specifications (Factory)
Wheel Diameter Location Size Oset (mm)
18'' Front/Rear 18 x 8.5J 40
19" Front/Rear 19 x 8.5J 40
Road Wheel Nut Torque 129 lb. ft (175 Nm)
NOTE:
For instructions on how to jack/lift Model 3, see Jacking and Lifting on page 213.
Wheel Alignment Values (Factory)
CAUTION: Vehicles with coil suspension must be aligned with a 68 kg weight in each
front seat.
Location Front Rear
Camber
-0.50° +/- 0.45° -1.00° +/- 1.0°
Camber Split
+/- 0.60° +/- 0.80°
Caster
5.70° +/- 1.0° Not applicable
Caster Split
+/- 1.0° Not applicable
Individual Toe
OUT 0.05° +/- 0.15° IN 0.20° +/- 0.15°
Toe Split
+/- 0.10° +/- 0.10°
Track Width (at wheel center height)
1580 mm 1580 mm
Non-Performance Coil Height (unladen)
NOTE: When measuring the ride height, measure 75
mm inward from the jacking hole in each corner of
the Battery. See the following image.
153 +/- 5 mm 157 +/- 5 mm
Performance Ride Height (unladen)
151 +/- 3 mm 155 +/- 3 mm
Wheels and Tires
228 MODEL 3 Owner's Manual