EasyManua.ls Logo

Tesla MODEL 3 2012 - Specifications; Identification Labels

Tesla MODEL 3 2012
311 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Vehicle Identification Number
You can find the VIN at the following
locations:
Touch Controls > Software on the
touchscreen.
Stamped on a plate located at the top of
the dashboard. Can be seen by looking
through the windshield.
Printed on the Product Plate, located on
the door pillar. The Product Plate is
located on the right side door pillar and
can be seen when the rear passenger
door is open.
Cars manufactured in Gigafactory
Shanghai before September 2020: The
VIN is located on a label that is stamped
onto the
floor and can be seen by moving
the front passenger seat forward and
lifting the carpet.
Cars manufactured in Gigafactory
Shanghai starting September 2020: The
VIN is stamped onto the
floor and can be
seen by moving the front passenger seat
rearward and lifting the carpet.
The VIN can also be read using an Onboard
Diagnostics II (OBD-II) code reader or
scanner. For instructions, refer to the
documentation provided by the manufacturer
of the OBD-II code reader or scanner. The
ODB-II diagnostic port is located under the
dashboard on the driver's side of the vehicle.
Identification Labels
216 MODEL 3 Owner's Manual

Table of Contents

Related product manuals