Touch to display information about the weather and the air quality.
Displays on the touchscreen status bar only when Model 3 detects a
programmed HomeLink within range, and the touchscreen is not already
displaying the HomeLink screen or popup. See HomeLink Universal
Transceiver on page 176.
Displays on the touchscreen status bar only when Model 3 is parked.
Add, configure (including Valet Mode and Use Easy Entry), or quickly
switch driver profiles. Driver profiles can also be accessed from the top
of any Controls screen. See Driver Profiles on page 50.
Available when Model 3 is parked, touch to manually turn Sentry Mode
on or o. To automatically turn Sentry Mode on every time you leave
your vehicle, enable the setting from Controls > Safety > Sentry Mode.
NOTE: For some vehicles manufactured after approximately November
1, 2021, the center console USB ports may only support charging
devices. Use the USB port inside the glove box for all other functions.
Displays when Model 3 is connected to a Wi-Fi network.
Displays when Model 3 cellular connectivity is very low or unavailable.
Touch this icon for quick access to Wi-Fi settings.
Status of the front passenger airbag (see Airbags on page 45).
2.
Navigation: Change the orientation of the map, find or navigate to a destination, and change
navigation settings (see Maps and Navigation on page 152).
3. Car status: This area dynamically displays the current status of Model 3 as you drive, park,
open doors, turn lights on, etc. Monitor this area when driving as it displays important
information such as driving speed and warning messages (see Car Status on page 64).
When the car is in Park, you can open the trunks or charge port door.
Touchscreen Overview
6 MODEL 3 Owner's Manual
To Next Page
Loading...
