A QUICK GUIDE FOR OWNERS
23
CLEANING THE INTERIOR
Frequently inspect and clean the interior to maintain its appearance and to
prevent premature wear. If possible, immediately wipe up spills and remove
marks. For general cleaning, wipe interior surfaces using a soft cloth (such
as microfiber) dampened with a mixture of warm water and mild non-
detergent cleaner (test all cleaners on a concealed area before use). To
avoid streaks, dry immediately with a soft lint-free cloth.
Interior glass
Do not scrape, or use any abrasive cleaning fluid on glass or mirrored
surfaces. This can damage the reflective surface of the mirror and the
heating elements in the rear window.
Airbag covers
Do not allow any substance to enter an airbag cover. This could affect
correct operation.
Dashboard and plastic surfaces
Do not polish the upper surfaces of the dashboard. Polished surfaces are
reflective and may interfere with your driving view.
Leather
Leather is prone to dye-transfer which can cause discoloration, particularly
on light colored leather. White and tan leather is coated with an anti-
soiling treatment. Wipe spills as soon as possible using a soft cloth
moistened with warm water and non-detergent soap. Wipe gently in a
circular motion. Then wipe dry using a soft, lint-free cloth. Using detergents
or commercially available leather cleaners and conditioners is not
recommended because they can discolor or dry out the leather.
Carpets
Avoid over-wetting carpets. For heavily soiled areas, use a diluted
upholstery cleaner.
Seat belts
Extend the belts to wipe. Do not use any type of detergent or chemical
cleaning agent. Allow the belts to dry naturally while extended, preferably
away from direct sunlight.
Do not allow water, cleaners, or fabric from cloths to enter a seat belt
mechanism. This could affect operation of the seat belt.
Touchscreen and instrument panel
Clean the touchscreen and instrument panel using a soft lint-free damp
cloth or a cleaning wipe specifically designed to clean monitors and
displays. Do not use glass cleaner or other cleaning solutions.
Chrome and metal surfaces
Polish, abrasive cleaners, or hard cloths can damage the finish on chrome
and metal surfaces.
CARE AND MAINTENANCE
To Next Page
Loading...
