What to do if the Tesla Vacuum Cleaner remote control does not work?
If the remote control for your Tesla Vacuum Cleaner isn't working, first press the button to stop cleaning. Then select the desired operation on the remote control. If it still doesn't work, ensure the batteries in the remote control are fully charged.
Why is the red LED permanently on my Tesla Vacuum Cleaner?
If the red LED on your Tesla Vacuum Cleaner is permanently on, it could be due to several reasons: * The battery may be exhausted, so remove the device from the window and charge it. * The power supply might be interrupted; plug the machine into a power outlet and use the directional buttons to move it to a safe removal spot. * The device may have lost vacuum; use the directional buttons to navigate it to a place for safe removal. * An edge detection sensor might be reporting an error; check the sensor for any obstructions.
Why does my Tesla RoboStar W550 Vacuum Cleaner move irregularly?
If your Tesla Vacuum Cleaner is moving irregularly, it's likely due to a dirty window. Clean the belts, replace the cleaning mops, and then start cleaning again.
How to fix the blue LED flashing on my Tesla Vacuum Cleaner?
If the LED on your Tesla Vacuum Cleaner flashes blue while it's attached to the window, it could be due to a few reasons: * The cleaning mops might not be correctly fitted; remove and reattach them. * An edge detection sensor may be reporting an error; ensure the cleaning mops aren't obscuring the sensors. * The window surface might be too dirty; manually clean the area where you want the device to attach.
General| Brand | Tesla |
|---|---|
| Model | RoboStar W550 |
| Category | Vacuum Cleaner |
| Language | English |
To Next Page