4. Technical data4
4. Technical data
Feature Values
Penetration probe
Sensor type NTC
Measuring range 50 +250 °C
Resolution 0.1 °C/°F/°R
Accuracy (±1 digit) ±1.0 °C (50.0 to 30.1 °C)
±0.5 °C (30.0 to +99.9 °C)
±1 % of the measuring range (+100.0 to +250.0 °C)
Response time t99 10 s (measured in moving liquid)
Measuring rate 0.5 s
Infrared measurement
Lens 10:1 + opening diameter of the sensor (12 mm)
Laser type 2point laser
Output / wavelength < 1 mW / 8 to 14 μm
Class / standard 2 / DIN EN 608251:2007
Measuring range 30 +250 °C
Resolution 0.1 °C/°F/°R
Accuracy (±1 digit) ±2.5 °C (30.0 to 20.1 °C)
±2.0 °C (20.0 to 0.01 °C)
±1.5 °C or ±1.5 % of the measuring value (+0.0 to +250.0 °C)
Measuring rate 0.5 s
General
Operating temperature ± 2 % (20 to +50 °C)
Transportation/ 30 to +50 °C
storage temperature
Power supply 2 x AAA batteries
Battery life 10 h (typical at 25°C)
Housing ABS/TPE/PC and diecast zinc/stainless steel
Protection classIP65
Dimensions 281 x 48 x 21 mm (immersion/penetration probe folded out)
178 x 48 x 21 mm (immersion/penetration probe folded up)
Weight 197g (incl. batteries)
Standards EN 13485
EC Directive 2004/108/EC
Warranty 2 years, warranty terms: see www.testo.com/warranty
Information on standards
This product complies with the EN 13485 standard for
penetration measurement.
Suitability: S, T (storage, transportation)
Environment: E (transportable thermometer)
Accuracy class: 0.5
Measuring range: -50...+250 °C
According to EN 13485, the measuring instrument should
be checked and calibrated regularly under the terms of
EN 13486 (recommended frequency: yearly).
Contact us for more information.
To Next Page
Loading...
