TESTO 175-H2 Short Instruction Manual

testo 175-H2
Kort bruksanvisning
0973.1754/02/T/wh/08.09.2006
Säkerhetsanvisningar
Läs noggrant följande säkerhetsanvisningar:
Använd aldrig instrumentet eller externa givare för mätning på eller i
närheten av strömförande delar, om instrumentet inte uttryckligen är
godkänt för ström- och spänningsmätning
Instrumentet får bara användas inom de specifikationer som anges
under "Tekniska data".
Hantera dataloggern försiktigt.
Instrumentet får enbart öppnas om detta uttryckligen beskrivs i
bruksanvisningen, i underhållssyfte.
Instrumentet får inte utsättas för våld.
Gör dig av med tomma batterier på ett ansvarsfullt sätt.
När instrumentet har tjänat ut kan du skicka det direkt till oss. Vi tar
hand om det på ett ansvarsfullt sätt.
Garanti
2 år
Läs först det här:
Standarder
Denna korta bruksanvisning ska användas som "lathund" ute på fältet.
Läs handboken som följer med i programpaketet, om du vill styra eller
programmera dataloggern.
Intyget om överensstämmelse styrker att denna produkt
uppfyller riktlinjerna i enlighet med 89/336/EEG.
Tekniska data
Parameter..............................................Fukt (%RH) / Temperatur (°C/°F)
Sensor ..........................................................................Fuktsensor / NTC
Antal mätkanaler ........................................................................2 interna
Mätområde ......................................0 ... 100 %RH (Ingen kondensation)
..............................................................................................-20 ... +70 °C
Noggrannhet ................................................................................±0,5 °C
......................................................................................................±3 %RH
Upplösning......................................................................................0,1 °C
....................................................................................................0,1 %RH
Loggintervall........................................................10s ... 24h (fritt valbart)
Förvaringstemperatur:........................................................-40 ... +85 °C
Driftstemperatur..................................................................-20 ... +70 °C
Driftstemperatur/display: ..................................................-20 … +65 °C
Minneskapacitet ................................................................16 000 värden
Instrumenthus ..........................................................................ABS/TPE
Mått i mm (lxbxh) ................................................................82 x 52 x 30
Vikt:......................................................................................................84g
Batteri ................................................................................Litium (1/2 AA)
Batteriliv ..............................................typiskt: 2½ år (loggintervall: 15 min.,
......................(driftstemperatur: -10 ... +50°C, display: Till, Status-LED (grön): Från)
Display
Undre larmvärde
Väntar på att loggern
ska starta
Loggning pågår
Loggning avslutad
Övre larmvärde
Batterikapacitet
Värden
Sparat värde
Aktuellt värde
1
Högsta sparade värde
Lägsta sparade värde
Enheter
Kanal 1
Kanal 2
Batterikapacitet
Symbol Kapacitet
75 ... 100%
50 ... 75%
25 ... 50%
10 ... 25%
<10%
Batteriet slut
Läser ut data
Byt batteri
OFF
1
Aktuella värden visas i displayen men sparas inte.
testo 175-H2
Short Instruction Manual
Safety instructions
Please read through the following safety instructions carefully:
Never use the instrument and external probes to measure on or near
live parts if the instrument is not expressly approved for current and
voltage measurement
The instrument should only be operated within the parameters
specified in the Technical data.
Please handle the logger with care.
The instrument should only be opened if expressly described in the
instruction manual for maintenance purposes.
Force should never be applied.
Please dispose of spent batteries responsibly.
You can return the instrument directly to us at the end of its service
life. We will dispose of it responsibly.
Warranty
2 years
Please note the following
Standards
This short instruction manual is intended as an additional aid on site. If
you wish to operate or program the data logger, please read the
instruction manual included with the software set and the interface.
The conformity certificate confirms that this product meets the
guidelines in accordance with 89/336/EEC.
Technical data
Parameter ....................................Humidity (%RH) / Temperature (°C/°F)
Sensor ..................................................................Humidity sensor / NTC
Number of measuring channels............................................2 x internal
Measuring range..................................0 to 100 %RH (no condensation)
..............................................................................................-20 to +70 °C
Accuracy ......................................................................................±0.5 °C
........................................................±3 %RH at rated temperature +25 °C
Resolution ......................................................................................0.1 °C
....................................................................................................0.1 %RH
Measuring rate ..........................................10s to 24h (freely selectable)
Storage temperature ..........................................................-40 to +85 °C
Operating temperature ......................................................-20 to +70 °C
Operating temperature/Display ........................................-20 to +65 °C
Memory capacity ............................................................16,000 readings
Housing......................................................................................ABS/TPE
Dimensions in mm (lxwxh) ................................................82 x 52 x 30
Weight..................................................................................................84g
Battery ............................................................................Lithium (1/2 AA)
Battery life..................................typical: 2½ years (Measuring rate: 15 min.,
....(Operating temperature: -10 to +50°C, Display: On, Status led (green LED): Off)
Display
Bottom alarm value
Waiting on measuring
program to start
Measuring program is running
Measuring program finished
Top alarm value
Battery capacity
Readings
Saved reading
Intermediate reading
1
Highest saved reading
Lowest saved reading
Units
Channel 1
Channel 2
Battery capacity
Symbol Capacity
75 to 100%
50 to 75%
25 to 50%
10 to 25%
<10%
Battery empty
Reading out data
Changing battery
OFF
1
Intermediate readings are shown in the display but are not saved.

TESTO 175-H2 Specifications

General

Brand	TESTO
Model	175-H2
Category	Measuring Instruments
Language	English