TESTO 176 User Manual

4 First steps
43
4 First steps
4.1. Unlock the data logger
1. Open the lock with the key (1).
2. Remove the lock (2) from the locking pin.
3. Pull the locking pin (3) out of the holes in the wall bracket.
4. Slide the data logger out of the wall bracket (4).
The data logger is delivered with the battery (type TL-
5903) inserted. The display of the data logger shows
rSt
.
4.2. Connecting the data logger to PC
For testo Comfort Software Basic 5:
The software is available in the Internet as a free download
requiring registration:
The instructions for the installation and operation of the
software can be found in the
testo Comfort Software Basic
5 instruction manual, which can be downloaded together
with the software.
For testo Comfort Software Professional und testo Comfort
Software CFR:
1. Install the software testo Comfort Software.
2. Connect the USB cable to a free USB port on the PC.
3. Loosen the screw on the right side of the data logger.
4. Open the cover.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

TESTO 176 Specifications

General

Type	Temperature and Humidity Data Logger
Resolution Temperature	0.1 °C
Resolution Humidity	0.1 %RH
Battery Life	Up to 8 years
Interface	USB
Dimensions	103 x 63 x 33 mm
Protection Class	IP65
Temperature Range	-20 to +70 °C
Humidity Range	0 to 100 %RH
Accuracy Temperature	±0.2 °C
Memory	2 million readings
Channels	1 (Temperature and Humidity)