7 Maintaining the product
56
The data logger needs to be reconfigured. For this
purpose the software testo Comfort Software must be
installed on the computer and a connection to the data
logger must have been set up.
9. Connect the data logger to the PC with a USB cable.
10. Start testo Comfort Software and set up a connection to the
data logger.
11. Reconfigure the data logger or load the old, saved
configuration, see separate operating instructions testo Comfort
Software.
- The data logger is once again ready for use.
7.2. Cleaning the instrument
CAUTION
Damage to the sensor!
> Ensure that no liquid enters the inside of the housing.
> If the housing of the instrument is dirty, clean it with a damp
cloth.
Do not use any aggressive cleaning agents or solvents! Weak
household cleaning agents or soap suds can be used.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
