TESTO 206 - Product Description; 3.1 Display and control elements; 3.2 Probe;BNC modules

3. Product Description
3.1 Display and control elements
3.2 Probe/BNC modules
MMOODDEE::
Changes function,
calls up “manual temperature
compensation” (pH3 BNC-
module only with non-
temperature compensated
probe)
OONN//HHOOLLDD::
On/Off switch,
holds readings
BBaatttteerryy
ccoommppaarrttmmeenntt
(rear side)
CCAALL::
Calls up “calibration”
mode
DDiissppllaayy
BBNNCC mmoodduullee ((ppHH33))
PPeenneettrraattiioonn pprroobbee ((ppHH22))
IImmmmeerrssiioonn pprroobbee ((ppHH11))
3. Product Description
6