Short manual testo 410-2 11
Short manual testo 410-2
À Protection cap: Park position
Á Impeller
 Humidity/temperature sensor
à Display
Ä Control keys
Å Battery compartment (on rear)
Basic settings
Instrument off >press and hold 2s > select with ( ),
confirm with ( ):
Unit of temperature: °C, °F > Unit of humidity: %, td (dew point) > WB (wet bulb) >
Unit of velocity: m/s, km/h, fpm, mph, kts, Beau > Auto off-Funktion: OFF, ON
Switching the instrument on
Press .
Switching the display light on (for 10s)
Instrument on > press .
Select display size
Instrument on > select with :
Velocity, humidity, wind chill temperature ( )
Select display mode
Instrument on > select with :
Current reading > Hold: Readings are held > Max: Maximum values > Min: Minimum
values > Hold Avg: Timed mean value calculation, see below
Timed mean value calculation for flow
Press several times, until Hold and Avg appear > Hold down
until - - - - appears > Releasing starts mean value calculation,
the current readings are displayed > End measurement:
press the mean value is displayed.
Switching the instrument off:
Instrument on >press and hold 2s.
de
enfres
it
pt
sv
nl
??
??
To Next Page
Loading...
