TESTO 410-2 Short Manual

Safety and the enviroment12
Safety and the environment
About this document
> Please read this documentation through carefully and
familiarise yourself with the product before putting it to use.
Keep this document to hand so that you can refer to it when
necessary. Hand this documentation on to any subsequent
users of the product.
> Pay particular attention to information emphasised by the
following symbols:
Important.
Avoid personal injury/damage to equipment
> Only operate the measuring instrument properly, for its
intended purpose and within the parameters specified in the
technical data. Do not use force.
> Never store the product together with solvents, acids or other
aggressive substances.
> Only carry out the maintenance and repair work that is
described in the documentation. Follow the prescribed steps
when doing so. Use only OEM spare parts from Testo.
> Do not use the device in a polluted environment (heavily dusty,
oil, foreign matter, volatile chemicals).
Protecting the environment
> Take faulty rechargeable batteries as well as spent batteries to
the collection points provided for them.
> Send the product back to Testo at the end of its useful life. We
will ensure that it is disposed of in an environmentally friendly
manner.

TESTO 410-2 Specifications

General

Measurement Parameters	Air velocity, Temperature, Humidity
Air Velocity Range	0.4 to 20 m/s
Temperature Range	-10 to +50 °C
Humidity Range	0 to 100 %RH
Resolution (Air Velocity)	0.1 m/s
Resolution (Temperature)	0.1 °C
Resolution (Humidity)	0.1 %RH
Accuracy (Temperature)	±0.5 °C
Display	LCD
Power Supply	2 x AAA batteries
Operating Temperature	-10 to +50 °C
Storage Temperature	-20 to +70 °C
Dimensions	133 x 46 x 25 mm
Units	m/s, °C, %RH
Measuring Principle	Vane anemometer