TESTO 410-2 Short Manual

Specifications 13
Specifications
The testo 410-2 is a flow/humidity/temperature measuring
instrument. It is normally used to measure the air speed at
ventilation outlets. In addition to the simultaneous measurement
of humidity and temperature, climatic conditions can also be
analysed.
Technical data
Measurement data
· Sensors:
Plastic impeller,
Testo humidity sensor,
NTC temperature sensor
· Parameters:
m/s, km/h, fpm, mph, kts, Beaufort,
°C, °F, wind chill, %rH, wet bulb, td
· Measuring ranges:
0.4...20 m/s, 80... 4000 fpm
-10...50 °C, 14...122 °F, 0...100 %rH
· Resolutions:
0.1 m/s, 1 fpm
0.1 °C, 0.1 °F, 0.1 %rH
· Accuracies (Nominal temperatue 22 °C,
±1 Digit):
±(0.2 m/s +2 % of reading),
±(40 fpm +2 % of reading),
±0.5 °C, ±0.9 °F,
±2.5 %rH (5...95%rH)
Long-term stability: ±1 %rF / year
· Measuring rate:
0.5 s, humidity: 1s
Further instrument data
· Protection class: IP10
· Ambient conditions:
-10...50 °C, 14...122 °F
· Storage/transport conditions:
-40...70 °C, -40...158 °F
· Temperature coefficient:
type (k=1) 0.06 %rF / K
· Voltage supply:
2x 1.5 V type AAA
· Battery life:
60 h (without display light)
· Dimensions:
133x46x25mm / 5.2x1.8x1.0 in (inc.
protection cap)
· Weight: 110 g / 3.9 oz (inc. batteries
and protection cap)
Directives, standards and tests
· EC Directive: 2014/30/EC
de
enfres
it
pt
sv
nl
??
??

TESTO 410-2 Specifications

General

Measurement Parameters	Air velocity, Temperature, Humidity
Air Velocity Range	0.4 to 20 m/s
Temperature Range	-10 to +50 °C
Humidity Range	0 to 100 %RH
Resolution (Air Velocity)	0.1 m/s
Resolution (Temperature)	0.1 °C
Resolution (Humidity)	0.1 %RH
Accuracy (Temperature)	±0.5 °C
Display	LCD
Power Supply	2 x AAA batteries
Operating Temperature	-10 to +50 °C
Storage Temperature	-20 to +70 °C
Dimensions	133 x 46 x 25 mm
Units	m/s, °C, %RH
Measuring Principle	Vane anemometer