TESTO 416 User Manual

6 First steps
9
6.3 Establishing a Bluetooth
®
connection
The instrument can be connected to the testo Smart App via
Bluetooth
®
connection

The measuring instrument is switched on.

To enable the Bluetooth
®
connection
for the first time, press and hold
(approx. 2 sec) the ◄ key.
While the instrument is trying to
establish a Bluetooth
®
connection,
the icon flashes on the display.
Bluetooth
®
remains enabled until it is
disabled manually by pressing and
holding (approx. 2 sec) the ◄ key.
The measuring instrument saves the
Bluetooth
®
setting and, depending
on the configuration, starts up with
Bluetooth
®
enabled or disabled.

TESTO 416 Specifications

General

Type	Vane Anemometer
Measuring Range	0.6 to 40 m/s
Accuracy	±(0.2 m/s + 1.5% of mv)
Resolution	0.1 m/s
Operating Temperature	0 to +50 °C
Storage Temperature	-20 to +70 °C
Power Supply	9V block battery
Probe Diameter	16 mm
Protection Class	IP40
Dimensions	133 x 46 x 25 mm
Battery Life	Approx. 80 hours