TESTO 416 User Manual

6 First steps
7
6 First steps
c
6.1 Inserting / changing batteries
WARNUNG
Serious risk of injury to the user and/or destruction of the instrument.
There is a risk of explosion if the batteries are replaced with ones that
are the wrong type.
- Only use non-rechargeable alkaline batteries.

The instrument is switched off.
1
Open the battery compartment (on the back of the instrument) via the
snap lock.
2
Insert or replace batteries (3 x AA
alkaline batteries).
Observe the polarity!
3
Close the battery compartment.
When not in use for a long period: Take out the batteries.
Symbol explanation
Do not allow children under 6 years of age to play with batteries.
Do not throw batteries in the trash.
Do not charge batteries.
Do not place batteries near fire.
Batteries are recyclable.
+ - +

TESTO 416 Specifications

General

Type	Vane Anemometer
Measuring Range	0.6 to 40 m/s
Accuracy	±(0.2 m/s + 1.5% of mv)
Resolution	0.1 m/s
Operating Temperature	0 to +50 °C
Storage Temperature	-20 to +70 °C
Power Supply	9V block battery
Probe Diameter	16 mm
Protection Class	IP40
Dimensions	133 x 46 x 25 mm
Battery Life	Approx. 80 hours