TESTO 416 User Manual

7 Using the product
16
7.2.3 Carrying out multi-point mean calculation
1
Press MODE/END.

flashes.

The number of readings recorded is displayed in the upper line, while
the current reading is displayed in the lower line.
2
To record readings (in the desired quantity):
Press MENU/ENTER (several times).
3
To end measurement and calculate the mean value:
Press MODE/END.

and flash.
The number of measured values and the calculated multi-point mean
value are displayed.
4
To switch back to the measuring view:
Press MODE/END.

TESTO 416 Specifications

General

Type	Vane Anemometer
Measuring Range	0.6 to 40 m/s
Accuracy	±(0.2 m/s + 1.5% of mv)
Resolution	0.1 m/s
Operating Temperature	0 to +50 °C
Storage Temperature	-20 to +70 °C
Power Supply	9V block battery
Probe Diameter	16 mm
Protection Class	IP40
Dimensions	133 x 46 x 25 mm
Battery Life	Approx. 80 hours