TESTO 650 - Page 61

61
Ordering data
Adapter for humidity probe 0636.XX60 and Pt100 probe 0605.XX73/XX72
Connection cable for probes with plug-in head, 1.5 m long, PUR coating material
Connection cable for probes with plug-in head, 5 m long, PUR coating material
Extension cable betweem plug-in cable and instrument, 5 m long, PUR coating material
Telecope for probes with plug-in head, can be extended to max. 1 m, cable: 2.5 m, PUR coating material
Control and adjustment set for humidity probe and 3-function probe
Adapter for humidity adjustment of 3-function probe 0635.1545, order with adjustment set
Control and storage humidity (33 %RH) for humidity probe and 3-function probe
Ø 21 mm
Ø 12 mm
0554.0640
0554.0647
0628.0012
Ø 21 mm
Ø 12 mm
0554.0665
0554.0755
Ø 21 mm
0554.0667
Caps for all humidity probe types Ø 12 and 21 mm
Metal protection cage, material: stainless steel V4A. Quick adjustment time, robust
and temperature-proof. Application: for measuring air velocity <10 m/s.
Wire mesh filter, material: stainless steel V4A. Quick adjustment time, protected
from dirt and damage. Applications: meteorology, splashwater, condensation.
Insertable filter for metal protection cage and plastic cage.
Cap with wire mesh filter
Teflon sintered filter, material: PTFE. Not affected by condensation, water-repellent,
resistant to corrosive substances. Applications: compressed air measurements, high
humidity range (continuous measurements), high velocities.
Stainless steel sintered cap, material: stainless steel V2A. Highly robust, suitable
for plunging, should be cleaned with compressed air, mechanical protection of
sensor. Applications: large mechanical loads, high velocities.
Surface adapter for humidity probe, Ø 12 mm
Ø 12 mm
0554.0757
Ø 21 mm
Ø 12 mm
0554.0666
0554.0756
Part no.
Part no.
Connection cable
0554.0454
0430.0143
0430.0145
0409.0063
0430.0144
0554.0660
0554.0661
0554.0636
Accessories for humidity/temperature probe,
3-function probe and rpm probe