TESTO 915i - List, Graphic Diagram and Table View

6 Using the App
15
the true surface temperature without the probe (or the reverse if the
surface is colder than the environment). This effect can be corrected by
an increment in % of the reading.

The probe is connected to the SMART App.
1
Click on .

Main menu opens.
2
Click on Sensors.

The Sensors menu opens.
3
Click on the required sensor.

Information is displayed about the model, order number, serial number
and firmware version.
4
Click on the Settings tab.

The settings window opens.
5
Click on Use surface increment.
6
Enable Activate surface increment using the slider.
6.6. List, graphic diagram and table view
The available readings can be displayed in different ways in the
various views.
• List view
Displays the readings transmitted by the Smart Probe in the
form of a list. Readings from all connected Smart Probes are
displayed here.
• Graphic diagram view
The graphical progression of up to four different readings can
be displayed. Tap on a reading above the diagram to select the
readings to be displayed.
• Table view
In the Table view, all readings are displayed in sequence
according to date and time. The different readings from the
individual Smart Probes can be selected by pressing ◄ ►.
www.calcert.com sales@calcert.com1.800.544.2843
0
5
10
15
20
25
30