TESTO Saveris U1 radio analog coupler User Manual

5 First steps
76
19. Click in the Connection type cell of the probe to be assigned to
a router.
- The cell is shown as a selection list.
20. Use button to open the selection list and select the router to
which the probe should be assigned.
Probes in a mobile zone cannot be assigned to a router.
21. Perform steps 21 and 22 for any other probes with
measurement data to be transmitted to the Saveris base via a
router.
22. Click on [Next >].
- The wizard is displayed with the start of measurement
configuration and the list of newly registered probes.

TESTO Saveris U1 radio analog coupler Specifications

General

Brand	TESTO
Model	Saveris U1 radio analog coupler
Category	Measuring Instruments
Language	English