Need help?Do you have a question about the TESTO Saveris and is the answer not in the manual?
General| Humidity Range | 0 to 100 %RH |
|---|---|
| Measurement Parameters | Temperature, Humidity |
| Data Transmission | Wireless |
| Alarm Function | Yes |
| Resolution | 0.1 °C, 0.1 %RH |
| Radio Frequency | 868 MHz, 915 MHz |
| Data Storage | Internal memory, Cloud |
| Power Supply | Battery |
Explains symbols, writing standards, and general usage guidelines for the manual.
Provides safety instructions for operating and maintaining the testo Saveris system.
Gives instructions for proper disposal of batteries and equipment according to regulations.
Describes the areas of application and intended use of the testo Saveris measurement system.
Lists the required operating system and computer specifications for the Saveris software.
Details the front and rear components and connections of the Saveris base unit.
Describes the optional GSM module for the Saveris base, including control keys and displays.
Details the Saveris cockpit unit, including its front/back views, control keys, and displays.
Describes radio probes, both with and without displays, and their LED indicators.
Details the components and indicators of the Saveris Ethernet probes.
Details the components and indicators of the Saveris router.
Details the components and indicators of the Saveris converter.
Details the components and indicators of the Saveris extender.
Details the components and indicators of the Saveris analog coupler.
Describes the client-server installation of the Saveris software.
Provides a flowchart illustrating the initial setup steps for the system.
Provides a flowchart for setting up the Saveris mobile system.
Guides on inserting the SIM card into the Saveris base GSM module.
Instructions for connecting the network cable to the Saveris base.
Instructions for connecting the GSM antenna to the Saveris base.
Details connecting the Saveris base to power via mains unit or screw terminal.
Guides on connecting the Saveris base to a computer via USB for commissioning.
Provides instructions for inserting batteries into the probes.
Guides on connecting radio probes to the Saveris base via radio.
Step-by-step guide for installing the Saveris software.
Instructions for starting up the Saveris system hardware.
Details how to disconnect the USB cable from the Saveris base.
Guides on starting the Saveris software application.
Explains how to integrate routers, converters, probes, extenders, and couplers.
Instructions for assigning a static IP address to the Saveris base.
Explains how to integrate a Saveris converter for radio transmission over long distances.
Guides on integrating Ethernet probes into the Saveris system.
Instructions for assigning a static IP address to the Saveris base.
Explains how the Saveris extender communicates with radio probes and the base.
Describes the function and integration of the Saveris cockpit unit.
Explains how to integrate transmitters with analog couplers into the system.
Ensures proper operation of the measuring system through testing.
Provides instructions for mounting the Saveris system hardware.
Explains the design and components of the Saveris software user interface.
Details menus and commands available in the Saveris software.
Guides on managing zones for probe assignment and organization.
Guides on creating and managing tours within the Saveris system.
Information on the alarm function and configuration steps.
Explains how to analyze measurement data using diagrams, histograms, and tables.
Guides on checking and acknowledging triggered system or probe alarms.
Guides on printing measurement data and archiving reports.
Information on the database system and its capacity.
Menu for determining settings for base, probes, and other components.
Determines how automatic reporting should take place.
General maintenance procedures including backups, reboots, and updates.
Guides on de-registering and adding new components to the system.
Defines calibration and adjustment, and outlines factory adjustments.
Guides on saving data from the Saveris base using the startup wizard.
Provides steps for restarting the Saveris base to resolve issues.
Instructions for removing a probe from its wall bracket.
Guides on checking and changing batteries in the probes.
Details how to change batteries in the Saveris base and probes.
Guides on performing software and firmware updates for the Saveris system.
Lists technical specifications for Saveris base, probes, router, converter, extender, and coupler.
Provides troubleshooting solutions for common converter and cockpit unit issues.
Lists alarm messages for the Saveris base and their possible causes/solutions.
Lists available accessories and spare parts with their article numbers.
To Next Page
