TESTO Saveris User Manual

5 First steps
47
5.7. Connecting USB cable (optional)
For the commissioning, you can connect the Saveris base via a
USB cable to the computer on which the Saveris client is installed.
For this, first connect the USB cable to the Saveris base.
During continuous operation, operate the base via the
network cable, not via the USB cable. In combination
with virtual systems, a USB connection works
unreliably, which is why we recommend connecting the
base via Ethernet.
> Plug the USB cable into the Saveris base.
Do not screw on the cable cover of the Saveris base
until after the commissioning and removal of the USB
cable; see Disconnecting USB cable, page 56.

TESTO Saveris Specifications

General

Humidity Range	0 to 100 %RH
Measurement Parameters	Temperature, Humidity
Data Transmission	Wireless
Alarm Function	Yes
Resolution	0.1 °C, 0.1 %RH
Radio Frequency	868 MHz, 915 MHz
Data Storage	Internal memory, Cloud
Power Supply	Battery