TESTO Saveris - Connecting Saveris base with power supply

5 First steps
45
5.6. Connecting Saveris base with power supply
You can connect the Saveris base to the power supply via the
included mains unit or via the 24 V AC/DC plug-in/screw terminal.
Pos: 58 /TD/Erst e Schritte/testo Saver is/02a-1 Stromver sorgung über Netztei l verbinden @ 0\mod_11913283 26843_79.docx @ 5392 @ 3 @ 1
5.6.1. Power supply via mains unit
Pos: 59 /TD/Erst e Schritte/testo Saver is/02a-2 PRO Stromversor gung über Netzteil verbinden @ 1\mod_120005802 0189_79.docx @ 7535 @ @ 1
Pos: 60 /TD/Erst e Schritte/testo Saver is/02a-3 Prof Stromver sorgung über Netztei l verbinden @ 2\mod_12054938 29800_79.docx @ 129 83 @ @ 1
1. Connect mains cable to the Saveris base.
2. Ensure that cabling cannot be pulled out using a cable tie at the
eyelets for strain relief .
3. Connect mains plug to the power supply.
- The Saveris base automatically switches on after selecting the
language at the base and is ready for operation.