TESTO Saveris User Manual

7 Maintaining the product
175
Pos: 199 /TD/Produ kt instand halten/te sto Saveris/02 Komponen ten hinzufügen Transpor t @ 0\mod_118847650398 4_79.docx @ 2918 @ 3 @ 1
7.2.2. Adding new components
With the subsequent addition of a component, it is
possible that the measuring cycle is not synchronous
with that of the components already present.
This results in the readings seeming to be missing in
the table view if readings are not input from all probes at
a point in time.
1. Register new probe on the Saveris base; see Connecting radio
probe, page 49.
2. Start the testo Saveris startup wizard.
- The startup wizard is opened.
3. Click on [Next >].
- The Commission new probe dialogue box is displayed.

TESTO Saveris Specifications

General

Humidity Range	0 to 100 %RH
Measurement Parameters	Temperature, Humidity
Data Transmission	Wireless
Alarm Function	Yes
Resolution	0.1 °C, 0.1 %RH
Radio Frequency	868 MHz, 915 MHz
Data Storage	Internal memory, Cloud
Power Supply	Battery