TESTO Saveris User Manual

6 Using the product
117
6.3. Creating, editing and deleting zones
After you have familiarized yourself with the menus of the Saveris
software, you can now turn to creating zones, for example to
separate the probes according to location. You could perhaps
combine probes that are located in store rooms into one zone and
probes that are in cold rooms into another.
Changing or deleting zones during operation will affect
subsequent generation of PDF reports. As these changes
also apply retroactively, old zone configuration data is
overwritten.
If a PDF report is generated retroactively from the past,
only the most recent zone configuration is used for report
generation. Without a database backup, complete
retraceability of the changed or deleted zones cannot be
guaranteed.
Pos: 141 /TD/Produ kt verwenden/testo Sa veris/Kühlcontainer einrichten - Transpor t/Mobile Zone anlegen Er klärung @ 8\mod_12913 08189666_79.doc x @ 74528 @ @ 1
The assignment of radio probes to zones is carried out in the
startup wizard. This can be changed later on via Start | Edit.
You can assign a maximum of 4 radio probes to one mobile
zone and monitor max. 2 mobile zones simultaneously in
one tour.
Pos: 142 /TD/Produ kt verwenden/testo Sa veris/03 Gruppen einr ichten/organisier en/04 Zonen anlegen Tran sport @ 8\mod_129913980 6592_79.docx @ 77283 @ 3 @ 1
6.3.1. Creating zones
1. In the navigation area, click on Stationary zones or Mobile
zones.
- In the data area, the available zones are displayed.
2. In the Start | Edit zones menu, select the command New zone.
- The New zone dialogue box is displayed.
3. If required, deactivate any unneeded channels.
At least one channel must be activated.
In mobile zones, all channels of a probe must be
assigned to the same zone.
4. In the Name field, enter the name of the new zone.
Assign names for the zones that are not longer than 15
characters.
5. Confirm entries with [OK].
- The New zone dialogue box is closed and the new zone is
listed in the tree structure in the data area.

TESTO Saveris Specifications

General

Humidity Range	0 to 100 %RH
Measurement Parameters	Temperature, Humidity
Data Transmission	Wireless
Alarm Function	Yes
Resolution	0.1 °C, 0.1 %RH
Radio Frequency	868 MHz, 915 MHz
Data Storage	Internal memory, Cloud
Power Supply	Battery