TESTO Saveris User Manual

5 First steps
65
5.14.1.4. Assigning probes
To assign a probe to a router, both must be connected
in the Saveris base.
1. Under Start | All Programs | Testo click on Saveris Startup
Wizard.
- The welcome dialogue of the startup assistant is shown.
2. Click on [Continue >].
- The System status dialogue with the General tab is shown.

TESTO Saveris Specifications

General

Humidity Range	0 to 100 %RH
Measurement Parameters	Temperature, Humidity
Data Transmission	Wireless
Alarm Function	Yes
Resolution	0.1 °C, 0.1 %RH
Radio Frequency	868 MHz, 915 MHz
Data Storage	Internal memory, Cloud
Power Supply	Battery