TESTO Saveris User Manual

5 First steps
103
5.16.2. Setting up Saveris base with stand
When selecting the location for the Saveris base, take
into account the following points:
• The Saveris base must stand on a level, non-slip
surface.
• The Saveris base must be positioned close enough
to the computer used and a possible power supply
in accordance with the cabling provided.
1. Place the Saveris base on the stand .
2. Set up the Saveris base at the desired location.

TESTO Saveris Specifications

General

Humidity Range	0 to 100 %RH
Measurement Parameters	Temperature, Humidity
Data Transmission	Wireless
Alarm Function	Yes
Resolution	0.1 °C, 0.1 %RH
Radio Frequency	868 MHz, 915 MHz
Data Storage	Internal memory, Cloud
Power Supply	Battery