TESTO Saveris - Setting up Base Alarms; Setting up Alarms

6 Using the product
125
6.5.1. Setting up base alarms
Any configuration changes are only transferred to the
probe/base once you have exited the Alarm management
menu!
You should therefore exit the Alarm management menu
after editing.
6.5.1.1. Setting up alarms
1. Click on Alarm management in the navigation area.
- The data area shows the sub-menus Base alarm settings,
Component alarm settings, Channel alarm settings, Alarm
recipients, Alarm rules, Comments for acknowledging
alarms.
2. Click on Base alarm settings.
- The Base alarm settings are shown in the display area.