TESTO Saveris - Page 126

6 Using the product
126
Display Explanation
Device alarm
Saveris Base
Setting options for the base alarms
Missing PC connection: no response from
the PC
Memory almost full: alarm when the base
memory overflows.
No GSM network: alarm when there is no
GSM connection.
SMS overflow: alarm when an error occurs
in SMS transmission.
Power failure: alarm when the base power
supply fails.
Alarm conditions
Re-trigger confirmed alarms after [min]: re-
triggers alarms that have already been
acknowledged following a specified duration.
Alarm output
Saveris Base
Relay
Audible signal
Light signal
Advanced settings Radio interference (stationary) [min]
Network interference [min]
Radio interference (mobile) [h]
Apply settings
Saves the alarm settings.
Activate/deactivat
e all
Activates all available alarm settings.
Activate
scheduling
Activates the configured scheduling.
Alarms scheduling
Opens a window for configuring the
scheduling.
3. Carry out alarm settings for the base.
4. Click on Apply Entries.
5. Exit Alarm Management menu.
- Alarm settings are transferred to the devices.