TESTO Saveris User Manual

5 First steps
106
Pos: 104 /TD/Ers te Schritte/testo Sa veris/07 **** Montage der Hardware/04 Sy stem prüfen @ 0\mod_119132 7191562_79.docx @ 5362 @ 3 @ 1
5.16.4. Checking the measuring system again
> Perform another test run at the measuring system; see
"Performing the test run".
After mounting the hardware, perform another check of
the system to test the proper function of the measuring
system.
You can thus recognize whether probes are located
outside of the range of the Saveris base, where
applicable, or the radio link is interfered with by
structural conditions.
Pos: 105 /TD/--- Seitenwechsel --- @ 0\mod_1173774430601_ 0.docx @ 283 @ @ 1

TESTO Saveris Specifications

General

Humidity Range	0 to 100 %RH
Measurement Parameters	Temperature, Humidity
Data Transmission	Wireless
Alarm Function	Yes
Resolution	0.1 °C, 0.1 %RH
Radio Frequency	868 MHz, 915 MHz
Data Storage	Internal memory, Cloud
Power Supply	Battery