TESTO Saveris User Manual

3 Specifications
11
determining time factor for synchronisation. This is noticeable when
updating changed alarm conditions or also when cancelling alarms.
If synchronisation is not completed, this is indicated by a * after the
system component in the System view.
If you want to mix existing components (order number:
0572.x1xx) with newly purchased components (order
number 0572.x2xx) in a Saveris system, please first check
compatibility.
If you have any queries or problems, please contact Testo
Customer Service. Contact data see back of this document
or website www.testo.com/service-contact.
Pos: 21 /TD/Leis tungsbeschreibung/ Verwendung/testo Sa veris/04 Haftungsau sschluss @ 1\mod_11973 76616906_79.docx @ 6214 @ 5 @ 1
Exclusion of liability
The testo Saveris system was developed to consolidate a large
amount of measurement data from spatially separated probes in
the Saveris software, document it without interruption and issue
alarms in the event of irregularities.
The testo Saveris system is not designed to undertake control and
regulation tasks according to the regulations. Particularly the
alarms are not to be perceived as so-called critical alarms with
which the endangerment of life or limb or damage to equipment can
be averted.
Liability on the part of Testo AG for damages from this type of
application is excluded.
Pos: 22 /TD/Übersc hriften/3.2 Syste mvoraussetzungen @ 0\ mod_1187269645125_79. docx @ 2385 @ 2 @ 1
3.2. System requirements
Pos: 23 /TD/Leis tungsbeschreibung/S ystemvoraussetzun gen/Betriebssys tem (Saveris) @ 2\mod_120704 9498903_79.doc x @ 13979 @ 5 @ 1
Operating system
The software will run on the following operating systems:
• Windows® 7 SP1 64-bit/ 32-bit or later
• Windows® 8 64-bit/ 32-bit
• Windows® 8.1 64-bit/ 32-bit
• Windows® 10 64-bit/ 32-bit
• Windows® Server 2008 SP2 64-bit
• Windows® Server 2008 R2 64-bit
• Windows® Server 2012 64-bit
• Windows® Server 2012 R2 64-bit
Pos: 24 /TD/Leis tungsbeschreibung/S ystemvoraussetzun gen/Rechner (Sa veris) @ 0\mod_1191918060734 _79.docx @ 5433 @ 55 @ 1
Computer
The computer must meet the requirements of the corresponding
operating system. The following requirements must additionally be
fulfilled:

TESTO Saveris Specifications

General

Humidity Range	0 to 100 %RH
Measurement Parameters	Temperature, Humidity
Data Transmission	Wireless
Alarm Function	Yes
Resolution	0.1 °C, 0.1 %RH
Radio Frequency	868 MHz, 915 MHz
Data Storage	Internal memory, Cloud
Power Supply	Battery