TESTO Saveris User Manual

5 First steps
46
Pos: 61 /TD/Erst e Schritte/testo Saver is/02b-1 Stromver sorgung über AC/DC verbinde n @ 0\mod_1191328406187_7 9.docx @ 5402 @ 3 @ 1
5.6.2. Power supply via plug-in/screw connection
(optional)
Pos: 62 /TD/Erst e Schritte/testo Saver is/02b-2 PROF Stromvers orgung über AC/DC verbi nden @ 1\mod_12021244376 60_79.docx @ 8078 @ @ 1
Pos: 63 /TD/Erst e Schritte/testo Saver is/02b-3 Prof Stromver sorgung über AC/DC verbi nden @ 2\mod_1205493913 317_79.docx @ 13002 @ @ 1
1. Loosen clamping screws no. 1 and no. 2.
2. Insert cable in the terminals as shown.
Observe permissible operating voltage!
- The Saveris base automatically switches on after selecting the
language at the base and is ready for operation.
3. Tighten clamping screws.
4. Ensure that cabling cannot be pulled out using a cable tie at the
eyelets for strain relief .
Pos: 64 /TD/Erst e Schritte/testo Saver is/02 PROF USB-Kabel für Inbetriebnahme @ 2\mod_1 205494087055_79.doc x @ 13021 @ 2 @ 1

TESTO Saveris Specifications

General

Humidity Range	0 to 100 %RH
Measurement Parameters	Temperature, Humidity
Data Transmission	Wireless
Alarm Function	Yes
Resolution	0.1 °C, 0.1 %RH
Radio Frequency	868 MHz, 915 MHz
Data Storage	Internal memory, Cloud
Power Supply	Battery