TESTO Saveris - Connecting the network cable to the Saveris base

5 First steps
43
Pos: 53 /TD/Erst e Schritte/testo Saver is/01 Netzwerkkabe l an Base anschließen @ 1\mod_11 97969679015_79.doc x @ 6526 @ 2 @ 1
5.4. Connecting the network cable to the Saveris
base
1. Loosen and remove screw connection.
2. Remove cover from Saveris Base.
3. Plug the network cable into the Saveris base.
4. Connect the network cable to the Ethernet.