Need help?Do you have a question about the TESTO Saveris base and is the answer not in the manual?
General| Brand | TESTO |
|---|---|
| Model | Saveris base |
| Category | Measuring Instruments |
| Language | English |
Details safety precautions for operation, maintenance, and environmental protection.
Lists required operating systems, computer specifications, and software prerequisites for installation.
Describes the front and rear components and interfaces of the Saveris base unit.
Explains the features and components of radio probes, both with and without displays.
Describes the features and connections of Saveris Ethernet probes, including their display and ports.
Details the Saveris router's components, including antenna, LED, and connection ports for power and data.
Guides users on how to correctly insert a SIM card into the Saveris base for GSM module functionality.
Details how to connect the Saveris base to a power source using either a mains unit or a screw terminal.
Describes the process of wirelessly connecting radio probes to the Saveris base for data acquisition.
Provides step-by-step instructions for installing the testo Saveris software on a computer.
Guides users through the initial startup process and configuration of the Saveris system hardware.
Details the necessary steps to perform a test run to ensure the proper operation of the entire measuring system.
Covers the procedures for physically mounting the Saveris base and probes in their operational locations.
Introduces the graphical user interface of the Saveris software, explaining its layout and main components.
Lists and explains various menus and commands available within the Saveris software for data management and analysis.
Explains how to set up system and probe alarms, including basic settings for SMS messages.
Describes methods for analyzing collected measurement data, including diagram and table views.
Explains the processes for calibrating and adjusting probes to ensure measurement accuracy.
Details the procedure for backing up system data from the Saveris base to a computer.
Guides users on how to safely replace the batteries in the Saveris probes.
Explains how to update the Saveris system software and firmware for optimal performance.
Provides detailed technical specifications for the Saveris base, probes, routers, and converters.
Lists common alarm messages from the Saveris base and their potential causes and solutions.
Lists available accessories and spare parts for the testo Saveris system, including article numbers.
To Next Page