4 Product description
23
Displays
Quality of the radio link.
Indicator as to whether a communication with the Saveris base
or a router or converter is performed.
Battery status.
Unit of the reading:
• % for humidity measurement
• mA for current measurement
• °Ctd or °Ftd for dewpoint measurement.
Reading.
Indicator as to whether the reading has exceeded the upper ( )
limit value or undershot the lower ( ) limit value.
Number of the channel.
Display for a second sensor in the probe.
Pos: 36 /TD/Produk tbeschreibung/ Übersicht/testo Saver is/01 Funkfühler/03 B edeutung der LED @ 0\mod_119 0807440000_79.doc x @ 5133 @ 255 @ 1
4.3.3. Meaning of the LED displays at the probes
Connecting to the Saveris base
Hold the connect button on the rear of the probe until the LED
begins to flash orange.
Representation Explanation
Flashing orange
An attempt to establish the connection to
the Saveris base.
Lit up green
The connection to the Saveris base was
performed successfully.
Lit up red
The connection to the Saveris base
failed.
To Next Page
Loading...
Need help?
General
