Why does my Tesvor Vacuum Cleaner S6 suddenly make noise?
If your Tesvor Vacuum Cleaner S6 suddenly makes noise, the side brushes or rolling brush might be deformed. To identify the source of the noise, remove the side brushes and the rolling brush separately to see if the noise persists. If it does, you've found the problematic accessory and should replace it.
What to do if Tesvor Vacuum Cleaner S6 does not start as scheduled?
If your Tesvor Vacuum Cleaner S6 doesn't perform cleaning work automatically as scheduled on the remote control, it might be due to scheduling failure. Ensure the remote control scheduling is in a non-sleep state, and that you hear a voice prompt confirming the start and success of scheduling. Also, remember to reschedule the robot after it has been powered off.
Why Tesvor Vacuum Cleaner S6 moves abnormally?
If your Tesvor Vacuum Cleaner S6's movements or travel path are abnormal, there may be an issue with the S6's software. Clean the sensors carefully with a dry cloth and restart the S6 by turning the power switch off and back on.
General| Shape | Round |
|---|---|
| Product color | White |
| Built-in display | No |
| Remotely operated | Yes |
| Dust container type | Dust bag |
| Noise level | 70 dB |
| Water tank capacity | 0.35 L |
| Dust capacity (total) | 0.6 L |
| Base station functions | Charging |
| HEPA filtration system | - |
| Package type | Box |
| Charging time | 6 h |
| Battery capacity | 5200 mAh |
Weight and Dimensions| Height | 98 mm |
|---|---|
| Diameter | 340 mm |
To Next Page
