To Next PageTo Next Page
Need help?Do you have a question about the Tetratec EX 700 and is the answer not in the manual?
General| Type | External Filter |
|---|---|
| Maximum Flow Rate | 700 L/h |
| Hose diameter | 12/16 mm |
| Filter baskets | 3 |
| Pre-filter | Yes |
| Cable Length | 1.5 m |
| Suitable for aquariums with a capacity of | 150 liters |
Instructions for filling the filter media containers with specified media types for different models.
Procedure for correctly aligning and securing the motor head to the filter case.
Steps for attaching the hose adaptor unit to the motor head using the central lever.
Connecting the water hoses to the valve adapter unit for water intake and return.
Recommended distances for filter placement relative to the water surface for optimal operation.
Connecting the intake pipe to the strainer and affixing it to the tank wall with clips.
Attaching the overflow pipe, spray bar, and stopper to the tank wall using suction cup clips.
Connecting intake and return hoses to the motor head adapters and cutting to length.
Steps to prime the filter and initiate water flow, including checking for leaks.
How to adjust the water flow rate using the valve taps on the hose adapter unit.
Instructions for safely removing the hose adapter unit from the motor head.
Steps to release the motor head and lift it from the filter case to access internal components.
Procedure for cleaning filter media using tank water to preserve beneficial bacteria.
Overview of different filter media types, their functions, and recommended replacement intervals.
How to clean internal hoses to remove dirt and algae that may reduce water flow.
Instructions for cleaning the impeller case and its components for optimal performance.
Guidance on correctly aligning and reattaching the motor head after maintenance.
Steps for reinserting the hose adapter unit into the motor head and securing it.
Procedure for priming the filter with water after maintenance to ensure proper operation.
Instructions for plugging the Tetratec EX filter back into the power supply.
Diagnosing and resolving issues with attaching the motor head to the filter case.
Identifying causes and solutions for water leaks from the motor head.
Troubleshooting steps when the filter motor fails to start or operate.
Addressing causes of decreased water flow, such as clogged media or hoses.
Resolving problems related to air entering the filter or the automatic priming system.
Identifying and fixing unusual noises emitted during filter operation.
