10
EQUIPOTENTIAL EARTHING
CONNECTION
Connect the metal parts of the
cabin with the yellow wire as
indicated in the diagram.
There is a terminal at point (8) for
the equipotential connection of the
other grounds present in the room.
N.B.: If one of the components
indicated in the diagram is not
present on the model purchased,
insulate the corresponding “fast
on”.
ONLY FOR ARTICLES
220TOP - 220PLUS
CONNECTION OF EARTHING WIRE (YELLOW/GREEN) TO THE FRAME
EMERGENCY TAP (ARTICLE 220E)
SHOWER SUPPORT ROD
SHUT-OFF VALVE FOR THERMOSTATIC MIXER
MIXER OR THERMOSTATIC MIXER
DEVIATOR OR SLIDING RAIL (ARTICLE 220E)
TAP
FRAME
PUMP SUPPORT
2
3
1
5
4
8
6
F
7
To Next Page
Loading...
