31
ASSEMBLING THE CABIN
GB
USING THE SHOWER FOR
THE FIRST TIME
Once all of the connections are
made and before fastening the
cabin to the wall, remove all of the
adhesive tags.
Run the regeneration and a sauna
cycle, following the instructions
contained in the attached user’s
manual.
Make sure that there are no water
leaks in the connections made and
that everything operates normally.
If the first time the sauna system is
turned on the control panel
displays the “DIAGNOSIS 9”
message, remove the grate and
press the button for resetting the
thermostat, indicated with the
arrow.
11
HYDRAULIC
CHARACTERISTICS
Diagram of the mixed water flow
for the various features.
12
To Next Page
Loading...
