220M (MULTI) - Multifunction Hydroshower with whirlpool
C - Hot water connection.
Use a 60 cm flexible stainless
steel hose.
F - Cold water connection.
Use a 60 cm flexible stainless
steel hose.
A1 - Connection for the both shower
system using tube 9, which is
supplied and mounted on the
cabin and the diverter, and tube
11 for the foot massage unit.
A2 - Connection for the tap with tube
4 supplied and mounted on the
cabin and the diverter.
A3 - Connection for the cable coming
from the whirlpool power unit to
the control panel.
A4 - Connection for the tube for the
vertical massage.
The electrical installation must
comply with the safety regulations for
bathroom installation, as described in
the attached user’s manual.
CA- Electrical connection for the
IPX5 whirlpool (box with cable
clamp PG 13.5).
A5 - Diagram for the water connection
for the model with a thermostatic
mixer.
When installing the shut-off
valve, pay attention to the
direction of the arrow.
Blue
Yellow-Green
Brown
To Next Page
Loading...
