INSUFFICIENT PRESSURE DURING
SANITIZATION
(BASIC E - BASIC G)
The sanitizing process stops, the HYDRO key is
lit at high intensity and ashing at low frequency.
After 5 minutes the display will return to standby.
Suction openings dirty or clogged.
Clean the suction openings.
NO HYDRO LEVEL WHILE SANITIZING
(BASIC E - BASIC G)
The sanitizing process stops or will not start; the
SANITIZE key is lit at high intensity, the HYDRO
key is lit at high intensity and ashing at low
frequency.
After 5 minutes the display will return to standby.
Add water to the tub.
16
EN
HYDRO BASIC
In case of breakdown or incorrect operation (e.g., anomaly in the pump, control unit, power, unit ...)
contact your nearest Teuco authorised assistance centre (see list of Teuco authorised assistance
centres). The manufacturer cannot be held responsible for damage caused by appliances that have
been improperly tampered with.
To Next Page
Loading...
