Teuco Hydroline - Starting Hydromassage (Basic E;G)

30min.
STARTING THE HYDROMASSAGE
(BASIC E - BASIC G)
- When in standby mode, the panel is lit at low
intensity.
- To start the hydromassage function, press the
HYDRO key.
- The hydromassage will start up and the HYDRO
key will light up at high intensity and the SANITIZE
key will switch off.
- After 30 minutes, the hydromassage function will
switch off automatically.
- To stop the hydromassage, press the HYDRO
key again.
- The panel will return to standby mode.
- If the HYDRO key is ashing, this means
that there is not enough water in the tub. The
hydromassage will not work until the water level
is sufcient.
9
EN
HYDRO BASIC
During hydromassage operation, it is possible to use the botanical cosmetic products made by Teuco.
Do not use soaps, bath oils or foaming products.