Inserting the Battery
The battery compartment
is located in the right ear
piece. Pull the cover down
and off to change the
battery.
Insert the enclosed bat-
tery or an equivalent type
AAA battery. Make sure
the polarity is correct.
Push the cover back onto
the ear piece.
Connecting the
Headphones
Connect the headphones to the
headphone jack of your audio
system using the enclosed
cable.
If necessary, use the airplane
adapter (included in the product
contents) or a 3.5 mm to 6.3
mm adapter
(not included in the
product contents).
Handling
Put your headphones on so that both
ears are firmly covered. In the process,
take note of the markings on the ear
pieces: R=right, L=left.
If necessary, adjust the headband length
to your head size.
Operation
Pushing the ANC button on
your headphones activates the
following functions:
Push 1×: ANC on (red LED illu-
minates continuously). *
Pushing it again briefly: Muting
playback on/off.
Push 1× and hold: ANC off (red
LED deactivated).
* A blinking LED indicates that the battery level is critically
low
What is ANC?
ANC=Active Noise Cancellation is a func-
tion for reducing disruptive background
noise.
Technical Data
Driver unit: Ø 40 mm
Max. power: 200 mW
Impedance: 48 Ω
Sensitivity
at 1 kHz:
89 ±3 dB (ANC off)
93 ±3 dB (ANC on)
Frequency response: 20 – 20000 Hz
ANC
button
Manual No. 93668 GB 20151117
Please contact our customer service with any questions, suggestions or complaints:
Lautsprecher Teufel GmbH
BIKINI Berlin
Budapester Str 44
10787 Berlin (Germany)
Phone:
00800 - 200 300 40
(toll-free)
Fax: +49 (0)30 - 300 930 930
www.teufelaudio.com
No responsibility is assumed for
the correctness of this information.
Technical changes, typographical
errors and other errors reserved.
To Previous Page
Loading...
