Why my Teufel Headphone MOVE BT cannot be turned on?
If your Teufel Headphone MOVE BT cannot be turned on, it is likely that the rechargeable battery is empty. In this case, charge the rechargeable battery.
What to do if there is no audio playback despite Bluetooth connection on my Teufel MOVE BT?
If you're experiencing a lack of audio despite a successful Bluetooth connection with your Teufel Headphone, consider these potential causes and solutions: * Ensure that your Teufel Headphone is powered on. * Verify that the Teufel Headphone is properly registered and paired with your external player. Check all settings related to Bluetooth pairing. * Confirm that the Bluetooth function is enabled on your external player. If needed, consult the player's user manual for guidance. * Check the volume levels on both the player and the earphones, and increase them if they are set too low.
Warning: Prolonged high-volume listening can cause hearing loss. Advise setting player volume low before use.
Warning: Lithium batteries can explode if handled improperly. Avoid heat, burning, and improper charging.
Warning: Risk of injury if ear pieces/hooks get stuck. Consult an ENT doctor if unable to remove.
Warning: Radio waves may affect sensitive devices. Use Bluetooth only in permitted environments.
Instructions for powering the earphones on/off using the multifunction button, including LED and voice feedback.
Instructions on how to reset the earphones' Bluetooth pairing settings to their factory default state.
General| Type | On-ear |
|---|---|
| Connectivity | Bluetooth |
| Bluetooth Codec | aptX, AAC, SBC |
| Driver Size | 40 mm |
| Microphone | Yes |
| Foldable | Yes |
| NFC | No |
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | 32 Ω |
To Next Page
