• MOVE BT
24
Other Functions And Displays
Pairing mode
Pairing mode will automatically end if the Blue-
tooth
®
connection is not established within
3 minutes. Then the LED will stop flashing.
• To switch pairing mode back on, hold the multi-
function button
2
down for approx. 2 seconds.
• The earphones will switch back to pairing mode
and the LED
4
will flash blue every 2 seconds.
Automatic deactivation
If you do not push a button on the MOVE BT after
aborting pairing mode, it will turn off completely
after an additional 3 minutes.
• To switch the earphones back on, hold the
multifunction button
2
down for approx.
2 seconds.
You will hear the voice instruction “Power
on”. The earphones will automatically switch
to pairing mode and the LED
4
will flash blue
every 2 seconds.
2
4
To Next Page
Loading...
