Bluetooth Operation
Helpline No. UK/Northern Ireland 01270 508538 Rep.Ireland 1800 995 036
Web Support www.quesh.co.uk
Model No: 47743
16
Pairing
To pair your mobile phone with the device simply activate the Bluetooth
on your mobile phone and search for devices. When the stereo has been
found it should show as Car Kit, when you try to connect to I, it will ask for
a password which is 0000. When you have successfully paired your
phone the message BT READY will be displayed followed by the mobile
number.
When the phone has successfully connected you will see a blue led on
the display flashing. This LED will turn to solid when you are on a call or
disappear when you disconnect from the stereo.
Dial
To make a call simply press the TEL button and enter the number you
wish to call using the remote control. When your ready to make the call
press TEL again, to end the call simply press clear.
Accept/Reject/Hold/End Call
Accept – Press the Tell button
Reject – Press the CLEAR button
To Transfer A Call Either From The Stereo Or To The Stereo – Press and
hold TEL for around 3-4 seconds.
Auto Connect
This unit support the “Auto Connect function”.
To Next Page
Loading...